Model LCX | Draw Wire Solutions

  • Fast and easy encoder mounting
  • Wire length options from 1 to 42.5 m

Model LCX Features

  • Fast and easy encoder mounting
  • Wire length options from 1 to 42.5 meters
  • Linearity ± 0.05 % of full range (with encoder)
  • Optional high corrosion protection
  • Temperature range -20° C to 85° C
  • Optional low temperature range of -40° C

download_blueDownload Model LCX Datasheet

The LCX Series of Draw Wire Solutions is manufactured for EPC by our German technology partner.

Purchase Options

  • Buy through a distributor
  • Get a Quote

Model LCX Description

Available in wire lengths from one meter to 42.5 meters, the Model LCX Draw Wire is compatible with the following 58 mm shafted encoders with clamping flange: Model A58SB, which offers SSI and CANopen® communication protocols; Model A58SE, which offers EtherCAT®, EtherNet/IP™, or PROFINET® communication protocols; Model 758, a high-performance incremental encoder; and the Model 858S, a stainless steel incremental encoder. Choose the right encoder and wire length for your application.

To calculate resolution

CPR / Sheave circumference = pulses/mm

Product Drawings

Similar Products

Model LCX Encoder Options

Choose one of these encoders. Contact Technical Support for more information.

Image Model Choose options: Drawings Datasheet Product page
a58se-mh-clamping-flange

Model A58SE

Ethernet absolute encoder

10 mm shaft

MH Clamping flange

Choose EtherCAT, EtherNet/IP, or PROFINET

 Drawing | Model A58SE (MH) Datasheet | Model A58SE Model A58SE product page
a58sb-mh-clamping_logos_480

Model A58SB

Bus absolute encoder

10 mm shaft

MH Clamping flange

Choose CANopen or SSI

Drawing | Model A58SB (MH) axial

Drawing | Model A58SB (MH) radial

 Datasheet | Model A58SB (MH) Model A58SB product page
758-a-clamping-flange-20-type

 

Model 758

High performance incremental encoder

10 mm shaft

Clamping flange 20 Type (A)

 Drawing | Model 758 (A) Datasheet | Model 758 Model 758 product page
858-main

Model 858S

Stainless steel incremental encoder

10 mm shaft

Clamping flange 20 Type (A)

 Drawing | Model 858S (A)
 Datasheet | Model 858S Model 858S product page

Model LCX Accessories

See Model LCX datasheet for exact dimensions.

Magnetic Clamp

Stock #097002

lcx-accessories_magnetic-clamp_stock-097002

Use the magnetic clamp to quickly attach the wire to metallic objects without any assembly time. A rubber coating provides gentle contact (e. g. on painted surfaces) and prevents slipping due to vibration. The magnet consists of a neodymium core for an increased magnetic force of 260 N. The hook makes it easy to attach the wire clip.

Deflection Pulley

Stock #097001

lcx-accessories_pulley_angle

The wire must be extracted from the draw wire unit in line with the exit axis. The maximum deviation off the exit axis of the outlet is 3°. A deflection pulley allows a change in the direction of the wire. Several pulleys may be used. The wire clip must not be guided over the deflection pulley.

  • Material foot: Anodized aluminium
  • Material wire wheel: POM-C
  • Mounting: By 2 hexagon socket or countersunk screws M6, vertical or horizontal mounting is possible.
  • Ball bearings: With special low temperature grease and RS-sealing. Temperature: -40° to 80° C